The #1 US-owned power transformer manufacturer in North America Core type transformers up to 500 MVA, 525kV Shortest lead time in the industry Shell type power transformers up to 1400MVA 500kV The most reliable transformers made right here in the USA

CLICK HERE FOR REP LOCATOR

CLICK HERE FOR REP LOCATOR

Virginia – Georgia Transformer Corporation

 

PAINTER I

 

Title:                Painter I

Reports to:     Production Supervisor

Location: Rincon, GA

Summary/Objective

The Painter prepares surfaces for painting and finishing; applies undercoats and finish coats using the full range of application methods and materials; mixes and matches paints and finishes; advises in the selection and storage of painting materials. Maintains equipment. Performs related work as required.

Essential Functions and Responsibilities:

  • Read job orders and inspect workpieces to determine work procedures and materials required.
  • Clean surfaces of workpieces in preparation for coating, using cleaning fluids, solvents, brushes, steam or sandblasting.
  • Apply coatings to protect surfaces, using spray guns or brushes.
  • Examine finished surfaces of workpieces to verify conformance to specifications and retouch any defective areas.
  • Clean and maintain tools and equipment, using solvents, brushes, and rags.
  • Rinse, drain, or wipe coated workpieces to remove excess coating material or to facilitate setting of finish coats on workpieces.
  • Place coated workpieces in ovens or dryers for specified times to dry or harden finishes.

Required Education and Experience

  • High School Diploma / GED
  • 1-2 years of painting experience in a manufacturing or facilities operations setting
  • Ability to read and interpret drawings / diagrams and specifications – paint instructions
  • Ability to lift 50 lbs unassisted
  • Ability to bend, stand, climb or walk around very large objects
  • Ability and willingness to work overtime, evening / off shifts, weekends, and holidays
  • Experienced with forklift operations

Desired Characteristics and Abilities

  • Knowledge of industrial practices and processes of the manufacturing painting trade; paints, lacquers, enamels, epoxies, paint removers and related materials.
  • Knowledge of application methods and practices
  • Willingly accepts job challenges and work under stress or pressure
  • Self-starter – able to work with minimal direction or supervision

Abilities

  • Craftsmanship – The pride one puts into each and every product they produce.
  • Mix and Match — The ability to mix and match paints and apply protective finishes to a wide variety of surfaces.
  • Extent Flexibility — The ability to bend, stretch, twist, or reach with your body, arms, and/or legs.
  • Manual Dexterity — The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
  • Near Vision — The ability to read gauges and counter devices at close range (within a few feet of the observer).

Tools & Technology

  • Wet and dry abrasive equipment

 Other Duties

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

 

Interested candidates may apply by following the link https://secure.entertimeonline.com/ta/6083336.careers?ShowJob=470041925

Contact Us